Ring Builder

Your ring, in three steps

Engagement Ring·Made in Australia

Envy - Emerald Cut and Tapered Baguette Three Stone Ring

★★★★★ ·Hand-finished ·Lifetime warranty
From $3,759 AUD

Currently configured: 18ct Yellow Gold · Natural Diamond pavé

Hand-finished in our Australian workshop. Choose your metal, your pavé diamond type, your centre stone shape and your ring size below. Your centre diamond is chosen at Step 2. Read the full story ↓

1
Choose your metal
18ct Yellow Gold
How to choose your metal

Every option is hand-finished in our Australian workshop. The difference comes down to purity, weight and longevity.

  • 950 platinum · 95% pure · Naturally white and hypoallergenic. Never needs plating. The densest metal we work with, so it feels heaviest on the hand. Most enduring choice for daily wear.
  • 18ct gold · 75% pure gold · The traditional standard for fine Australian jewellery. Richer colour, heftier feel. Our recommendation for engagement rings and heirloom pieces.
  • 14ct gold · 58% pure gold · Slightly harder alloy than 18ct, priced a step below. A practical middle ground when durability matters as much as purity.
  • 9ct gold · 37.5% pure gold · The hardest gold in the range and the most affordable. Ideal for everyday chains, pendants and pieces that take heavier knocks.

On colour

  • Yellow gold deepens naturally with age and needs no plating.
  • White gold is rhodium-plated for its bright finish. Re-plate every 2 to 3 years at our workshop.
  • Rose gold deepens slightly with wear. No plating needed.

Which to pick if...

  • Wedding ring worn daily: 950 platinum
  • Engagement ring: 18ct gold, or platinum if you want maximum enduring wear
  • Everyday chain or pendant: 9ct for durability, 18ct for finer finish
  • Sensitive skin: platinum or high-karat yellow gold (avoid rhodium-plated white gold if you react to nickel; some rose gold alloys can react to copper sensitivity)
14ct
18ct
2
Choose your pavé diamonds
Natural Diamond
Natural vs Lab
Natural and lab-grown, both are real diamonds.

Same crystal structure, same hardness, same brilliance. The difference is origin.

  • Natural diamonds, formed deep in the earth over billions of years. Retain resale value longer.
  • Lab-grown diamonds, grown above ground in months, chemically identical. Often lets you fit a larger or higher-grade stone within the same budget.
iThis choice applies to the 2 pavé diamonds on this setting (0.30ct total). Your centre diamond, natural or lab, is chosen separately in Step 2.
3
Choose centre diamond shape
Emerald
Recommended centre carat for Emerald: 0.53.1ct
4
Choose your ring size
Not selected yet

Standard pricing for sizes F – O. Larger sizes available with a sizing fee.

Setting 18ct Yellow Gold $3,759
Your centre diamond Chosen in Step 2
Ring so far $3,759 + centre
Choose your centre diamond
Want to customise this design?

Our master jeweller creates custom designs, from subtle modifications to fully bespoke pieces.

Get in touch
Ships by
Saturday 19 September 2026
Every ring is hand-finished to order. Allow six weeks from order confirmation. Need it sooner? Talk to us about priority craft.
GIA & IGI Certified
Lifetime Warranty
Free Insured Shipping
14-Day Returns
Made in Australia
The Pavé Diamonds

The stones around your centre.

The Envy - Emerald Cut and Tapered Baguette Three Stone Ring is set with 2 small tapered baguette diamonds, each fitted individually by hand. Same MYD light-performance standard as your centre stone.

2
Pavé Diamonds
0.30ct
Total Weight (T.W.)
Tapered Baguette
Stone Shape
Claw / Bar Set
Setting Type
Colour and clarity change with your pavé choice
Weight, count, shape and setting stay the same. Only the two specs below shift.
Natural pavé Your choice
ColourF to G
ClarityVS
Stone typeNatural
vs
Lab-grown pavé Your choice
ColourD to E
ClarityVS
Stone typeLab-grown
Both grades exceed what the eye can tell apart. Toggle the choice above in your configurator to switch.

An emerald cut centre, framed by two tapered baguettes

The Envy is a three-stone engagement ring done classically. Emerald-cut centre diamond in the middle, two tapered baguette diamonds on either side, an 18ct or 14ct gold band that holds the three stones in a single quiet line across the finger. Past, present, future, in the cleanest possible form.

What sets this design apart from most trilogies is the baguette shape on the sides. Most three-stone rings use round brilliants or smaller emerald cuts on the sides, which read as smaller versions of the centre. Tapered baguettes read as architectural lines pointing toward the centre. The eye reads the geometry before it counts the diamonds. The centre stone gets more visual real estate than it does in a same-shape trilogy.

Choose 14ct gold (slightly harder-wearing, paler colour) or 18ct (richer colour, classical engagement ring weight) in white, yellow or rose. The white gold reads cleanest against the diamonds at all three positions. The yellow gold flatters slightly warmer centre stones if you've gone with a G to H colour grade. The rose gold is the less expected choice and the one a small minority of our customers go for.

Every Monroe Yorke ring goes through ten distinct stages over four to eight weeks. Design refinement. Three-dimensional modelling. Casting. Stone sourcing. Cleaning. Polishing. Setting. About eight hours of bench-level finishing. Quality control. And the final approval our master jeweller signs off himself. Made in Australia, ten stages, no shortcuts.

Who this ring is for

You like the idea of a trilogy but you don't want three round brilliants. You're drawn to the geometric line that the baguette shapes create. You probably also like architecture, or interiors, or design objects in general. This ring rewards considered taste.

If you want a three-stone ring with three emerald cuts (heavier presence, more diamond visible) look at the Aspen Platinum Emerald Trilogy. If you want a simpler solitaire emerald cut, look at the Lenore.

Our Diamond Standard

Cut for perfect light return.

The single standard every diamond we set has to meet, whether it's your centre stone or an accent.

Excellent cut

Excellent cut natural or Ideal cut lab. The single most important factor in how a diamond returns light. A great cut in a modest colour outperforms a poor cut in a top colour every time.

Symmetry & polish

Excellent symmetry, excellent polish. The finishing decisions the cutter makes after the cut is done. Determines whether the light comes out clean or scattered.

No fluorescence

None or Faint only. Strong fluorescence can make a diamond look milky or hazy in daylight. We hand-select stones with clean fluor grading.

Colour, honest

D to G natural. D to E lab-grown. The colour range where a diamond reads white to the naked eye without paying for grades you cannot see.

Hand-finished · Australia

Six stages, six weeks.

The process every ring goes through, in our Australian workshop.

01

Design lock

CAD file locked, dimensions verified against your ring size and centre stone spec.
02

Cast

The setting is cast from your chosen 14ct, 18ct or platinum alloy. One casting per ring.
03

Set the stones

Any accent diamonds are set individually, checked under 10x loupe between each.
04

Set the centre

Your GIA or IGI diamond seated into the mount. Prongs tightened, gaps checked.
05

Polish & finish

Every surface polished to mirror, every edge softened by hand.
06

QC & ship

Full quality check against the design brief, then insured overnight courier to your door.
Reviews

What people say about us.

★★★★★

"Sean was great to deal with. Professional, knowledgeable, and followed through with exactly what he promised. The quality of the ring is excellent and my fiancé and I are thrilled. I would highly recommend Monroe Yorke."

Steve Gilbey · Verified purchase
Common Questions

Your questions, answered.

Ring information reviewed August 2026

Why is the centre diamond bought separately?

Two reasons. Choice, the centre diamond is the single biggest variable in the ring's final look and price. Buying setting and diamond as one bundle means compromising on one to save on the other. This way you match the diamond exactly to your budget, taste, and the recipient's preference.

And speed, the setting can start being made the moment you order Step 1, while you take your time choosing the diamond.

Why do larger ring sizes cost extra?

More precious metal, more setting time. Sizes above the standard range use noticeably more gold or platinum and need extra finishing hours to keep proportions right. The exact supplement shows next to the size the moment you select it, and again as its own line in the running total.

What if I pick the wrong centre shape now?

You can change it up until you commit to a specific diamond in Step 2. Your shape choice on this page pre-filters the diamond search to speed things up. If you land on the search and change your mind, change the filter and the setting adapts.

Can I mix natural and lab-grown diamonds?

Yes. Your centre diamond can be natural or lab-grown regardless of any accent diamonds on the setting. All combinations are supported.

Can I see this ring in person?

Yes. Book a private appointment at any of our four Australian showrooms, Sydney, Melbourne, Brisbane or Perth.

How long from order to delivery?

Six weeks from the moment your order is confirmed. Includes the six workshop stages plus insured overnight shipping.

Explore

Other settings worth seeing.